[Next] [Previous] [Up] [Top] [Contents] [Back] |
Chapter 2 Functional Description
2.5 SCSI Bus Connection OptionsThe BI0316 can be connected to a SCSI bus initiator through the front or via the backplane connector. When the host is connected to the front connector, the backplane connector can be used to terminate or daisy-chain the SCSI bus signals. When the host is connected to the backplane connector, the front connector can be used for termination or daisy-chaining of the SCSI bus signals.
At the front, a 68-pin high density connector (P3) with 2-56 jack screws for cable retention is used. This connector complies to the SCSI-3 standard and connects directly to a Single-Ended or Differential bus SCSI-3 P-cable.
The P3 connector contact assignments for Single-Ended use can be found in Table D-4, "P3, P5-P6 SCSI-3 Connectors (Single-Ended)". When the BI0316 is used in a Differential bus the contact assignments are given in Table D-5, "P3, P5-P6 SCSI-3 Connectors (Differential)".
BI-0316 - Mass Storage Module - 6 DEC 1996 Copyright © 1996 Brand Innovators B.V. [Next] [Previous] [Up] [Top] [Contents] [Back]