[Next] [Previous] [Up] [Top] [Contents] [Back] |
Chapter 2 Functional Description
2.2 Position NumberingThe BI0316 holds up to two drives that are further referred to as drive 1 in position 1 and drive 2 in position 2.
Figure 2-1 Position Numbering
This numbering scheme is used for identification of the devices and their position on the BI0316.
The numbering scheme has no relation to the SCSI IDs of the drives on the SCSI bus. The numbering scheme indicates the physical order of the drives on the SCSI bus as observed from the VMEbus P2 connector to the front connector. When using the internal termination option of the drives, enable this option on the last drive of the SCSI cable.
BI-0316 - Mass Storage Module - 6 DEC 1996 Copyright © 1996 Brand Innovators B.V. [Next] [Previous] [Up] [Top] [Contents] [Back]