|
|
|
[Next] [Previous] [Up] [Top] [Contents] [Back] Chapter 4 Installation Procedures 4.3 Address SelectionThe BI-0433 module occupies 256 memory locations in the Short I/O space. The base address can be installed on any 256 byte boundary using hex switches SW1 and SW2. SW1 is used to set the Most significant nibble of the base address (A15-A12). SW2 is used to set the Least significant nibble of the base address (A11-A8).
BI-0433 - 12 Channel Incremental Encoder Interface with Isolated Inputs and Cable Fault Detection - 23 MAY 1997 Copyright © 1997 Brand Innovators B.V. [Next] [Previous] [Up] [Top] [Contents] [Back]
|