|
|
|
[Next] [Previous] [Up] [Top] [Contents] [Back] Chapter 3 Functional Description 3.3 Bus Interrupt ModuleThe Bus Interrupter Module on the BI-0433 generates interrupt requests to the VMEbus and handles interrupt acknowledge cycles.For each group on the BI-0433, the interrupt capability is enabled/disabled by writing to the corresponding control registers of the BIM. In addition, each group has its own interrupt vector, which is used during the interrupt acknowledge cycle.
BI-0433 - 12 Channel Incremental Encoder Interface with Isolated Inputs and Cable Fault Detection - 23 MAY 1997 Copyright © 1997 Brand Innovators B.V. [Next] [Previous] [Up] [Top] [Contents] [Back]
|